# CFD with UTCI annual wind speed

**URL:** <https://discourse.ladybug.tools/t/cfd-with-utci-annual-wind-speed/17976>\
**Category:** honeybee\
**Created:** [April 11, 2022, 3:43am UTC](https://discourse.ladybug.tools/t/cfd-with-utci-annual-wind-speed/17976 "2022-04-11T03:43:05Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![chris](https://discourse.ladybug.tools/user_avatar/discourse.ladybug.tools/chris/32/10179_2.png) [@chris](https://discourse.ladybug.tools/u/chris)\
**Post date:** [April 15, 2022, 2:44am UTC](https://discourse.ladybug.tools/t/cfd-with-utci-annual-wind-speed/17976/2 "2022-04-15T02:44:04Z")

</div>

This has already been answered here:

> [@UTCI. Accounting for both external glazing and point-by-point wind speeds](https://discourse.ladybug.tools/t/utci-accounting-for-both-external-glazing-and-point-by-point-wind-speeds/17600/10):
>
> Ok, I just merged a version of the component that can accept a folder of air speed values that align with the sensors. After you run the Versioner and restart Rhino, you’ll see that you can plug the folder into the \_wind\_speed\_ input of the recipe: … and this is what the folder should look like in relation to the model sensor grids: It looks like the Edddy team did a good job making it easy to run OpenFOAM simulations when the meshing isn’t complex and everything …

---

_[View the full topic](https://discourse.ladybug.tools/t/cfd-with-utci-annual-wind-speed/17976)._