# Fan coil units + DOAS : readEPResult : Heating energy output: fuel energy or electric energy?

**URL:** <https://discourse.ladybug.tools/t/fan-coil-units-doas-readepresult-heating-energy-output-fuel-energy-or-electric-energy/10231>\
**Category:** ladybug-legacy\
**Tags:** energyplus, energy, hvac, heating, openstudio\
**Created:** [July 1, 2020, 2:43pm UTC](https://discourse.ladybug.tools/t/fan-coil-units-doas-readepresult-heating-energy-output-fuel-energy-or-electric-energy/10231 "2020-07-01T14:43:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucia\_Delilah](https://discourse.ladybug.tools/letter_avatar_proxy/v4/letter/l/aeb1de/32.png) [@Lucia\_Delilah](https://discourse.ladybug.tools/u/Lucia_Delilah)\
**Post date:** [July 1, 2020, 2:43pm UTC](https://discourse.ladybug.tools/t/fan-coil-units-doas-readepresult-heating-energy-output-fuel-energy-or-electric-energy/10231/1 "2020-07-01T14:43:19Z")

</div>

Hi everyone,

I am running an energy simulation with Open Studio. For the HVAC system I have selected option 11.: **Fan Coil Units + DOAS**.

Based on the type of HVAC system, the output for the heating loads will show the fuel energy or electric energy needed for each boiler/heating element.

 ![image](https://discourse.ladybug.tools/uploads/default/original/3X/0/2/020bde3446e15c7b9c45e7240fe87d3dac1b6948.png)

Since I have only specified the type of HVAC system and the effectiveness of heat recovery, in which way i can verify which type of energy (fuel or electric) is reported in the **heating** output?

Thank you

---

<div class="post-metadata">

**Author:** ![Erikbeeren](https://discourse.ladybug.tools/user_avatar/discourse.ladybug.tools/erikbeeren/32/8868_2.png) [@Erikbeeren](https://discourse.ladybug.tools/u/Erikbeeren)\
**Post date:** [July 2, 2020, 12:47pm UTC](https://discourse.ladybug.tools/t/fan-coil-units-doas-readepresult-heating-energy-output-fuel-energy-or-electric-energy/10231/2 "2020-07-02T12:47:15Z")

</div>

Hi @Lucia_Delilah,

Have a look at ModelToIdf folder. In there you will find a document called “inTable.html”.  
It will show you a lot of data.

 ![image](https://discourse.ladybug.tools/uploads/default/original/3X/e/6/e65e9994895be48abf5b048530a92128c47f0f41.png)

 ![image](https://discourse.ladybug.tools/uploads/default/original/3X/8/d/8d835f54122556a986d3ba002ba429cc869118c0.png)

---

<div class="post-metadata">

**Author:** ![Lucia\_Delilah](https://discourse.ladybug.tools/letter_avatar_proxy/v4/letter/l/aeb1de/32.png) [@Lucia\_Delilah](https://discourse.ladybug.tools/u/Lucia_Delilah)\
**Post date:** [July 3, 2020, 1:18pm UTC](https://discourse.ladybug.tools/t/fan-coil-units-doas-readepresult-heating-energy-output-fuel-energy-or-electric-energy/10231/3 "2020-07-03T13:18:22Z")

</div>

Hi Erik,

thank you! I found it.

Regards,